WWT Shows | CLICK TO: Join and Support Internet Horology Club 185™ | IHC185™ Forums |
![]() |
• Check Out Our... • • TWO Book Offer! • |
Go ![]() | New Topic ![]() | Find-Or-Search ![]() | Notify ![]() | Tools ![]() | Reply to Post ![]() | ![]() |
I just finished up a Ebay purchase this weekend. The watch is a 16s convertiable movement number 2041109. The Elgin site dates it to 1886. Eleven jewel grade 93. The watch needs a ratchet wheel? I am looking for the wheel above the barrel that the click engages to. This one has several teeth missing which makes it a bit tricky when winding. The watch is running great and keeping time. This will complete the movement and then I need to change one hand. I'll post a pic later tonight when I get home. | |||
|
Bob, Sorry I can't help with the part, but I also see that some were 14s? Would like to see your pictures. Low production numbers too. Congratulations! Sheila | ||||
|
Your watch is a grade 93, model 1, 16 size. You are looking for a Rachet wheel. I am sorry I do not have a catalog number for you, but the model 1 is the important fact. You can probably find one at Uncle Larry's. See http://www.execulink.com/~lfoord/index/elgin.htm, but you need the catalog number. If someone cannot come up with the number on this board, write me at research@nawcc.org with your membership number and I'll see if we have the number at the library. Don | ||||
|
Bingo, I got one from a friend. It has all the teeth on it. My gess is that the spring broke at one time and wiped out the teeth. I'll post pics tonight. Thanks to you who replied. | ||||
|
I got the pics last night. The image is too large to send. Back to the drawing board and try tonight. | ||||
|
Bob, If you send it to me, I may be able to resize it for you. Check under my name for my e-mail addy and send it over if you can. I found a lot of catalog numbers for the wheels you may need, if you would like to have it. It's from the Elgin site. The wheels start down the page on page 113. Check it out, may help for future repairs. http://elginwatches.org/scans/tech_doc/1915_MC/m_index.html Sheila | ||||
|
Getting the pics took longer than the repair ![]() ![]() | ||||
|
That was the bad ratchet ![]() | ||||
|
Nice coin case ![]() | ||||
|
Coined edge ![]() | ||||
|
Dial pic ![]() | ||||
|
I think I got it. Software conflict, DA The watch still needs a little polishing on the case but I am really pleased with the result. | ||||
|
Bob, Your watch is beautiful, and your pictures look great, lots of detail, and so clean! Don't ya just love to see that shine? I just love to see a watch in need get a new life. Thank you for sharing it. PS I don't know what ate up those teeth, but it sure did a job on it huh? Sheila | ||||
|
Thanks, I really like the new camera. It was a bday gift. Had to buy a new lens to make it do what I wanted. If this works look below at the "before pics" ![]() | ||||
|
When I recieved it the crystal was broken ![]() | ||||
|
And before going into the ultrasonic tank ![]() | ||||
|
This makes it even better, I always am looking for Dueber Hampden pw's. With a little work this 121 yr old guy came out pretty good. I did notice that the camera picked up some "fuzz" left over from the case cleaning (q-tip). That was taken care of now. This job is done and put back for others to enjoy. I get the biggest kick out of bringing these back to life. ![]() | ||||
|
Bob, Oh my goodness! what a difference! Sometimes it takes pictures like these to show just how much they change with some tender loving care. I also forgot to mention that, that is one really nice coin case, and I do like that coined edge. I had not paid much attention to them before, but since I have been looking at them more often, the coined edge seems to pop out at me when I take the time to really look at them. I like it a lot. Congtatulations on a wonderful repair and such a nice watch. Sheila | ||||
|
Powered by Social Strata |
![]() | Your request is being processed... |
|