WWT Shows | CLICK TO: Join and Support Internet Horology Club 185™ | IHC185™ Forums |
![]() |
• Check Out Our... • • TWO Book Offer! • |
Go ![]() | New Topic ![]() | Find-Or-Search ![]() | Notify ![]() | Tools ![]() | Reply to Post ![]() | ![]() |
I picked this up recently at an auction. I thought it was interesting from an advertising standpoint, but it also poses a mystery. There are two pegs coming out of the back of the case. I have no clue as to what they might be for. any ideas? Tom ![]() | |||
|
The dial Tom ![]() | ||||
|
The back of the movement showing the two pegs. Tom ![]() | ||||
|
When I took off the back, I found that the pegs connected to nothing at all. Tom ![]() | ||||
|
Side view Tom ![]() | ||||
|
The winding keys seen in the side view look more like keys for other clocks: kitchen, mantle, etc. where the key is not attached to the movement. They seem to protrude farther than the usual alarm winders; the bulge in the middle of the alarm winder looks very strange. It might be worthwile to lookup the patent number on the dial. | ||||
|
John, The strange "knob" on the winding key puzzled me also. I have not had any luck with the patent number on the dial. I did however find THIS ebay item. My guess is that a lever attached to that part of the winding arbor and turned when the alarm went off. The lever would then, I suppose, turn the range off. Tom | ||||
|
HERE is an ad from 1916. Not much information, but it shows a picture of the clock on the stove. Tom | ||||
|
Perhaps the lever striking the pins would shut off the alarm by stopping the unwinding of the spring; that would prevent the alarm from sounding until the spring ran down and driving the neighbors mad. I don't see an alarm shut off on the clock. | ||||
|
Powered by Social Strata |
![]() | Your request is being processed... |
|