WWT Shows CLICK TO: Join and Support Internet Horology Club 185™ IHC185™ Forums

• Check Out Our... •
• TWO Book Offer! •
Go
New Topic
Find-Or-Search
Notify
Tools
Reply to Post
  
Gilbert Crystal Regulator mainspring question "Click" to Login or Register 
Picture of Bruce Byrd
posted
Can anyone give me the size of mainsprings in a Gilbert Crystal Regulator.. Thanks for any help


Bruce Byrd
 
Posts: 888 | Location: San Diego, California USA | Registered: December 27, 2002
posted
GREETINGS BRUCE, ARE THE MAINSPRINGS ENCLOSED IN A BARREL OR ARE THEY OPEN? ALSO DOES THE MOVEMENT HAVE AN OPEN ESCAPEMENT? LET ME KNOW AND I WILL GIVE YOU AN ANSWER. EDDIE
 
Posts: 140 | Location: St. Paul, Minnesota in the USA | Registered: June 11, 2008
Picture of Bruce Byrd
posted
Hi Eddie, the springs are not inside of a barrel. They are covered from view (safety type device I think). This model has an open escapement in the front of the clock. There are two models of this clock. I have the small 8 inch version..


Bruce Byrd
 
Posts: 888 | Location: San Diego, California USA | Registered: December 27, 2002
Picture of Greg Reeves
posted
Is this the three plate movement?

greg
 
Posts: 497 | Location: Genoa, New York U.S.A. | Registered: November 06, 2003
posted
GREETINGS BRUCE, THE MAINSPRING SIZE SHOULD BE .015 X 3/4 X 96 INCHES. TAKE CARE. EDDIE
 
Posts: 140 | Location: St. Paul, Minnesota in the USA | Registered: June 11, 2008
  Powered by Social Strata  
 


©2002-2023 Internet Horology Club 185™ - Lindell V. Riddle President - All Rights Reserved Worldwide

Internet Horology Club 185™ is the "Family-Friendly" place for Watch and Clock Collectors