WWT Shows CLICK TO: Join and Support Internet Horology Club 185™ IHC185™ Forums

• Check Out Our... •
• TWO Book Offer! •
Go
New Topic
Find-Or-Search
Notify
Tools
Reply to Post
  
chelsea hairspring?? "Click" to Login or Register 
posted
Good day to all - - I am in need of a hairspring for a chelsea movement. I have searched a bit on the forums and tried emailing Ron Bechler as he was praised repeatedly, but all attempts failed. Can anyone help me with a direction/parts source?
Thanks in advance!
Mike from Iowa
=)


Michael Wegner
 
Posts: 71 | Location: Garner, Iowa in the USA | Registered: December 23, 2017
Picture of Thomas M. Cusack
posted
Chelsea Clock will sell you one .Call them up give them clock serial number,They have plenty of parts
 
Posts: 175 | Location: New Hampshire in the USA | Registered: March 04, 2015
posted
Thanks for the glimmer of hope - - but they sent a reply about that part not being available any longer but they could custom make one if I sent it in. Serial number looked to be from 1905 to 1910 I believe. Time to get creative.
Again - - thanks for the reply!!
Mike


Michael Wegner
 
Posts: 71 | Location: Garner, Iowa in the USA | Registered: December 23, 2017
Picture of Dave Turner
posted
I had a Chelsea staff replaced by a guy in Florida. But for the life of me so far I can't find his contact. I'll do some more digging if you're inclined to call him.
Meanwhile, have you tried Timesavers:hairspring assortment


Dave Turner
 
Posts: 1979 | Location: Wilson, North Carolina in the USA | Registered: November 15, 2011
Picture of Thomas M. Cusack
posted
Its a platform escapement, Do they have the whole platform. At Chelsea Clock or you could just send them the part to make it might be pretty cheap or you can try here lenny@clockmedic.com or Paul on this site he fixed one for me ,still works great.
Big Auction site
https://www.ebay.com/itm/Chels...8:g:~WwAAOSwwJJcvgUZ
 
Posts: 175 | Location: New Hampshire in the USA | Registered: March 04, 2015
Picture of Dave Turner
posted
Thomas, That's the guy! Did a great job for me.
If I recall correctly, he used to work for Chelsea.


Dave Turner
 
Posts: 1979 | Location: Wilson, North Carolina in the USA | Registered: November 15, 2011
Picture of Thomas M. Cusack
posted
That is him now fixes them for his own business
 
Posts: 175 | Location: New Hampshire in the USA | Registered: March 04, 2015
Picture of Billy Kuhn
posted
Mat at matt@henningwatches.com
413=549=1950 He has cut staffs for me
 
Posts: 1012 | Location: Killen, Alabama in the USA | Registered: January 15, 2013
  Powered by Social Strata  
 


©2002-2023 Internet Horology Club 185™ - Lindell V. Riddle President - All Rights Reserved Worldwide

Internet Horology Club 185™ is the "Family-Friendly" place for Watch and Clock Collectors