|WWT Shows||CLICK TO: Join and Support Internet Horology Club 185™||IHC185™ Forums|
• Check Out Our... •
• TWO Book Offer! •
Reply to Post
A while back I bought a Needs Repair LOT off ebay of different PW movements. This Hamilton 18s 254433 was a bit impressive because the dial is metal and the movement is also nice.
I started checking and noticed it was clean looking, not any big problem but beat weak and eventually stopped. So I did a HALF CLEANING.
Off came the dial to allow any oilable jewels and from the back OILED what I could. I pegged the balance jewel holes, and pithed the pivots on the balance.
Put it all together and the watch perked up and ran FOR A COUPLE DAYS.
Something now had me wondering because the power to the pallet EVEN WITH A FULL WIND WAS REALLY MISSING. The watch just went from good response to quick maintenance to all of a sudden........
So I said to myself now I can find proof that a half cleaning isn’t enough. But HECK MAN the difference was like night and day. SOMETHING WAS THERE, but nothing looked askew. So I mixed up my secret formula and started a tear down.
First the balance bridge, then the mainspring bridge and YOU WILL NEVER BELIEVE THE GIFT UNDER THERE! As I write this the discovery is still where I found it but WHAT THE HECK IS IT?
THE CULBRET ?
|IHC Member 1613|
Looks like maybe a broken off dial foot???
|IHC Member 1610|
I don't know but it has to come out.
Just my 2 cents , could it be a broken winding stem , if it was in a swing ring case and the stem not pulled up when they raised the movement it snaps off a piece that size, is it square on one end ?
One more thing James , it would help if you could post the pics onto the site , it is our only way to save them ,they need to be about 640 pixels , I use my cellphone and it is the right size . there is also some help on the subject
Thanks Kevin .
Now I can try a full series within an album in one shot! I hope. I also see Debbie like google photos.
Also if I am using an ipad, in lieu of a desktop, or laptop, I would like to just locate a file right on my device. Resized of course!
The watch is totally running well. I have it in it’s case. My best guess (I somehow lost track of the part before I could clean it and photograph it, inspect it).
I believe it to be either a dial foot. Nothing else makes sense. It is shaped like a separated part of a second hand, but that would not be big enough. This thing was as bid in cross section as a case screw.
|Powered by Social Strata|