WWT Shows CLICK TO: Join and Support Internet Horology Club 185™ IHC185™ Forums

• Check Out Our... •
• TWO Book Offer! •
Go
New Topic
Find-Or-Search
Notify
Tools
Reply to Post
  
Narrow Pattern 992E Movements (DATABASE ADDED) "Click" to Login or Register 
IHC Member 1016
posted
Hi everyone. I got a 992E today that probably needs a new dial. I noticed the #5 case is in pretty good shape with no obvious brassing at my first glance. What is unusual is the damaskeen pattern. What do you think?

 
Posts: 3112 | Location: Klamath Falls, Oregon in the USA | Registered: October 13, 2007
IHC Member 1016
posted
This watch needs a service and a dial.

 
Posts: 3112 | Location: Klamath Falls, Oregon in the USA | Registered: October 13, 2007
IHC Member 1016
posted
Dial and case

 
Posts: 3112 | Location: Klamath Falls, Oregon in the USA | Registered: October 13, 2007
Site Administrator
IHC Life Member
Picture of Phillip Sanchez
posted
Mike, I listed some Hamilton dials this afternoon.
 
Posts: 4975 | Location: North Georgia Mountains in the U.S.A. | Registered: March 31, 2006


posted
Cannot go wrong with the 992E

Love the Monte dial on the 992E! Not trying to sway you Big Grin
 
Posts: 7178 | Location: Illinois in the USA | Registered: November 11, 2011
IHC Member 1016
posted
If I read the list correctly this is from the first run of 992Es. Is that what others get?
SN 2583795.
 
Posts: 3112 | Location: Klamath Falls, Oregon in the USA | Registered: October 13, 2007
IHC Member 1357
posted
Mike,that's what I get also. Congrats!! Roger
 
Posts: 4086 | Location: Carbon, Texas in the USA | Registered: January 24, 2010
IHC Vice President
Pitfalls Moderator
IHC Life Member
Picture of Edward L. Parsons, Jr.
posted
Congrats Mike, that's a first-run (movement #2581001-2583900) 992 Elinvar with the narrow-pattern damaskeening. I just acquired movement #2582635 last month, which had the same damaskeening.


Best Regards,

Ed
 
Posts: 6696 | Location: Southwestern Pennsylvania, USA | Registered: April 19, 2004
IHC Member 1016
posted
Here is the case back. I assume this is a #5 case and the smudges you see polished out real well. No visible brass, but a tiny ding in the back.

 
Posts: 3112 | Location: Klamath Falls, Oregon in the USA | Registered: October 13, 2007
IHC Member 1016
posted
Last photo. You can tell I'm excited.

 
Posts: 3112 | Location: Klamath Falls, Oregon in the USA | Registered: October 13, 2007
IHC Life Member
Picture of Eugene Buffard
posted
If you put it up for sale let me know. I own 2582929.
 
Posts: 3323 | Location: Illinois in the USA | Registered: July 06, 2010
posted
Congrats! I have 1st run 2582801 & 2583371. In my opinion you cannot go wrong with 992E and in particular these 1st run.
 
Posts: 36 | Location: Tennessee in the USA | Registered: November 04, 2011
IHC Member 1016
posted
Thanks for the comments. I seem to remember Lindell and I had a conversation about these several years ago. He indicated the 992E is not rare, but the narrow pattern 992E is rare. I bought this thinking I might resell but it sounds like the guys here on the club already have them Frown I have had it running and it seems to keep good time overnight. Any idea how much premium these bring? I've not noticed them on ebay, or here, as a sales result. Also, I think if I read the dial/case post in research, that this single sunk 080 dial could be original. I would entertain expert opinion on that even if I do replace it with a DS.
 
Posts: 3112 | Location: Klamath Falls, Oregon in the USA | Registered: October 13, 2007
IHC President
Life Member
Picture of Lindell V. Riddle
posted

Interesting topic!

Beginning with the 2012 Edition of the Complete Guide to Watches the differences between narrow (early) and later (wide) damaskeened 992 Elinvar movements are referenced at the top of page 231 with images of two representative watches from my collection.

On the subject of relative values, consider the fact that more than 60,000 of the wide-stripe movements were produced in eight runs whereas apparently less than 2,500 of the earlier first-run design. I have suggested the narrow-stripe might deserve a "one-star" designation.

About cases, we would be likely find the narrow-stripe movements in any of the Hamilton factory cases available in the 1930-31 time frame. Since the Case 5 came out in July of 1928 and it is shown in the Hamilton catalogs of the early 1930s it is among the correct case possibilities. One more point, the dial on Mike's watch could not be original as these watches came with Double-Sunk dials.

Here is a list of confirmed narrow-stripe 992 Elinvars...

2581109
2581193
2581899
2582163 (LVR shown in watch guide)
2582625 (Ed's)
2582635
2582729 (1931 Inscription, Case 7 64637)
2582929
2582948
2583165
2583636
2583795 (Mike's)
2583862

Please post or eMail additional numbers for the list.

Lindell

Wink
 
Posts: 10553 | Location: Northeastern Ohio in the USA | Registered: November 19, 2002
Picture of Richard Romero
posted
Mike,

I don’t have a first pattern 992E and would like one someday. As far as a premium I guess that depends on how much someone wants the watch on any given day. That’s a nice looking watch you have and besides the 080 dial the only issue I see is the minute hand is incorrect.

As I remember from doing the post on Hamilton dials the 080, 081, and 082 dial were designed when Hamilton was having problems manufacturing double sunk dials for the 992B RWS which was far after your movement was made.

I believe the correct HG 519 double sunk dial would be one with the heavier numerals which I notice on the 992E movements. I’m not sure because it could be the heavier numerals came out later and your watch is from the first run of 992E. I’m interested to hear what Lindell and Ed P. have to say on the issue.

I’m still learning about Hamilton dials and always will be. The more I find out the more questions that arise. At any rate the illustration below demonstrates the differences in the DS HG numeral boldness.

RR

The Bolder Numerals are on the left. Notice the 8, 9, and 4 have less white showing.

 
Posts: 1413 | Location: Fremont, California in the USA | Registered: February 06, 2010
IHC Member 1511
posted
Guys:

I have a narrow stripe 992E serial #2583862 in a marked YGF Hamilton Model #7 case serial #74904 in near mint condition.
Gary
 
Posts: 159 | Location: Rainelle, West Virginia in the USA | Registered: December 15, 2010
IHC Member 1016
posted
Thanks Lindell and Richard. I will put a 519 dial on this and check out the minute hand. It also needs a glass crystal and probably a service. I must have misread Richard's list of correct dials. The one on this watch is toast anyhow so it will be replaced. Stay tuned for finished photos.

If nothing else, this has brought this topic to the front of discussion. Something that I believe was needed.
 
Posts: 3112 | Location: Klamath Falls, Oregon in the USA | Registered: October 13, 2007
  Powered by Social Strata  
 


©2002-2023 Internet Horology Club 185™ - Lindell V. Riddle President - All Rights Reserved Worldwide

Internet Horology Club 185™ is the "Family-Friendly" place for Watch and Clock Collectors