WWT Shows CLICK TO: Join and Support Internet Horology Club 185™ IHC185™ Forums

• Check Out Our... •
• TWO Book Offer! •
Go
New Topic
Find-Or-Search
Notify
Tools
Reply to Post
  
beautiful early 1800 verge fusee "Click" to Login or Register 
IHC Member 1954
posted
I finaly completed one of my favorite pocket watches.a while back I took a chance and bought a case with only the dial and dial plate with it.it looked like it had spent its last days in the ground or something.it needed help.i got it for about $12 on ebay because no one else could see the potential.i got it and cleaned the case and dial with dish soap and an electric tooth brush.they came out nice and you couldn't tell they were the same pieces.i then went through all of my verge fuse movements and found one that I could make fit.i spent probably 40 hours trying to get the movement working but it just wasn't in the plans.i then found another that I got running and had to fit the dial plate and dial to.the winding hole was off a bit and I had to put another one in,but everything else worked out well.i now have the watch running well and I think it is a real beauty.the dial is solid silver with 3 different colors of gold or gold colored material.i just happened to have a perfect high dome crystal that was a bit to big,so I sanded the bottom down so it fit.solid silver heavy carved case looks great.just ready to start my next project.have a great day..

 
Posts: 203 | Location: British Columbia in Canada | Registered: May 11, 2014
IHC Member 1954
posted
pic 2

 
Posts: 203 | Location: British Columbia in Canada | Registered: May 11, 2014
IHC Member 1954
posted
pic 3

 
Posts: 203 | Location: British Columbia in Canada | Registered: May 11, 2014
posted
That is a beauty.Nice job of restoration.If you need a few more projects,I have a half dozen or so fusse movements you can have for the shipping cost.Regards.Norm
 
Posts: 484 | Location: Georgia in the United States | Registered: August 04, 2010
IHC Member 1954
posted
I would love to have them.tell me how much and I will paypal you the money for them.
 
Posts: 203 | Location: British Columbia in Canada | Registered: May 11, 2014
Picture of Peter Kaszubski
posted
Great job I like the dial very unusual.
looks like it will need gold tone second hand and is complete.
If you need bull eye crystals I have few for sale.
 
Posts: 4395 | Location: Arizona in the USA | Registered: July 23, 2011
IHC Member 1892
posted
Wonderful job Victor. I share your interest in the old fuse watches and have acquired a few. I don'y do so much with then anymore but I have kept them to enjoy. Mine are mostly English pair case. I would probably have a gold coloured second hand if you want to change it (not solid gold though). Holler if you want one, John
 
Posts: 361 | Location: Kincardine, Ontario in Canada | Registered: November 25, 2013
IHC Member 1954
posted
I looked through some of my stuff and came up with a gold toned second hand and installed it.looks right now...thanks for the coments.
 
Posts: 203 | Location: British Columbia in Canada | Registered: May 11, 2014
  Powered by Social Strata  
 


©2002-2023 Internet Horology Club 185™ - Lindell V. Riddle President - All Rights Reserved Worldwide

Internet Horology Club 185™ is the "Family-Friendly" place for Watch and Clock Collectors