WWT Shows CLICK TO: Join and Support Internet Horology Club 185™ IHC185™ Forums

• Check Out Our... •
• TWO Book Offer! •
Go
New Topic
Find-Or-Search
Notify
Tools
Reply to Post
  
Sanamo mainspring question. "Click" to Login or Register 
IHC Member 376
Watchmaker
Picture of Samie L. Smith
posted
I am cleaning a 16s sangamo 19 jewel model 9 and have a question on the mainspring..using the Swigart #,s i have the 47313 and 47314 springs which is 2.70mm wide x20-1/2in. long and .17mm thick..the old spring is the same size far as the length ,width and thickeness but with a T end like the 47333 spring..

anyone have a number on the correct mainspring for this watch .
thanks in adavance Smile
 
Posts: 3208 | Location: Monticello, Kentucky U.S.A. | Registered: June 24, 2004
posted
Samie,
C&E Marshall has the 47315 spring listed for the 4th through 9th models with 19 jewels.This has a t-brace end.The measurements are
2.70 X .18 1/2 X 20 1/2 ".
I don't have an Illinois catalog at home.
Hope this helps,
J Smith
PS how did the dial work?
JS
 
Posts: 188 | Location: Warrenton, North Carolina U.S.A. | Registered: January 12, 2003
  Powered by Social Strata  
 


©2002-2023 Internet Horology Club 185™ - Lindell V. Riddle President - All Rights Reserved Worldwide

Internet Horology Club 185™ is the "Family-Friendly" place for Watch and Clock Collectors