WWT Shows CLICK TO: Join and Support Internet Horology Club 185™ IHC185™ Forums

• Check Out Our... •
• TWO Book Offer! •
Go
New Topic
Find-Or-Search
Notify
Tools
Reply to Post
  
Help neeeded with a French Bracket Clock "Click" to Login or Register 
Picture of Ken Knight
posted
I have just acquired this brass French Bracket clock, and cannot find out anything about it.

It measures 7"high, by 5"wide, and 4"deep. It has dual time movement springs, and a sweep second hand that is controlled by a lever on the right hand side.

 
Posts: 285 | Location: Springfield, Ohio in the USA | Registered: June 06, 2008
Picture of Ken Knight
posted
It has a barometer on the top which reads in cm/hg.

 
Posts: 285 | Location: Springfield, Ohio in the USA | Registered: June 06, 2008
Picture of Ken Knight
posted
The movement has had the escape platform changed. and it has the usual patent and disclaimer info found on most French clocks.

Any thoughts or information would be helpful, as I have looked through many books, and have not been able to come up with much.

thanks in advance,

Ken

 
Posts: 285 | Location: Springfield, Ohio in the USA | Registered: June 06, 2008
Administrative Assistant
Picture of Dr. Debbie Irvine
posted

Still looking for answers…

_________________________________________

Ken Knight
posted July 20, 2015 14:48

Can someone please help me with the French clock I posted recently. I cannot find any information anywhere. It is unusual as it has a sweep second hand that can be turned on and off. Also, it appears too big to be a carriage clock, so is it a bracket clock? Any ideas would be appreciated.

Thanks,

Ken

_________________________________________

…keeping this request within the same topic.

 
Posts: 5222 | Location: Northern Ohio in the U.S.A. | Registered: December 04, 2002
  Powered by Social Strata  
 


©2002-2023 Internet Horology Club 185™ - Lindell V. Riddle President - All Rights Reserved Worldwide

Internet Horology Club 185™ is the "Family-Friendly" place for Watch and Clock Collectors