WWT Shows CLICK TO: Join and Support Internet Horology Club 185™ IHC185™ Forums

• Check Out Our... •
• TWO Book Offer! •
New Topic
Reply to Post
Moseley-Webster Staff Turning Lathe "Click" to Login or Register 
This is one of the oldest forms of lathes used in the Waltham factory.On the left hand side of the machine there is a combination of levers designed to provide for turnings of various lengths without necessitating a change of feed cams. It is the understanding of E.A. Marsh that the combination levers were designed by Mr Ambrose Webster, while the invention of the lathe should be credited to Mr Charles S. Mosley.

George Collard

Frank Menez
Trustee CRMI
Posts: 39 | Location: Somersworth, New Hampshire USA | Registered: February 18, 2005
Picture of Wayne C. Anderson
Pinion cutting machine on Display at the CRMI

Posts: 886 | Location: Nebraska, in the U.S.A. Heartland | Registered: November 22, 2002
  Powered by Social Strata  

©2002-2023 Internet Horology Club 185™ - Lindell V. Riddle President - All Rights Reserved Worldwide

Internet Horology Club 185™ is the "Family-Friendly" place for Watch and Clock Collectors