WWT Shows CLICK TO: Join and Support Internet Horology Club 185™ IHC185™ Forums

• Check Out Our... •
• TWO Book Offer! •
Go
New Topic
Find-Or-Search
Notify
Tools
Reply to Post
  
Church Automatic Turret Lathe "Click" to Login or Register 
posted
Church Automatic Turret Lathe-

With the use of the cross slide and four spindle turret six different operations can be done on a part before it is released from the machine and the next automatically loaded with picker from the loading plate. Some of these operations are turning, facing, drilling counter boring etc. Each loading plate is stamped with the name of the part to be made.

George Collard

Frank J Menez
Trustee CRMI
 
Posts: 39 | Location: Somersworth, New Hampshire USA | Registered: February 18, 2005
Picture of Wayne C. Anderson
posted
On display at the CRMI

 
Posts: 886 | Location: Nebraska, in the U.S.A. Heartland | Registered: November 22, 2002
Picture of Wayne C. Anderson
posted
The loading plates

 
Posts: 886 | Location: Nebraska, in the U.S.A. Heartland | Registered: November 22, 2002
posted
Thanks Wayne, interesting lathe, neat piece of equipment.
Thanks for the picture.
 
Posts: 2133 | Registered: June 01, 2003
  Powered by Social Strata  
 


©2002-2021 Internet Horology Club 185™ - Lindell V. Riddle President - All Rights Reserved Worldwide

Internet Horology Club 185™ is the "Family-Friendly" place for Watch and Clock Collectors