September 30, 2008, 12:14
Steve GossardPhiladelphia Watch look-alike
I have a 16s keywind that looks for all the world like a Philadelphia Watch Company watch, but the movement is not identified at all, and the serial number is 60,777-much too high to be a Philadelphia if the numbers were consecutive. This watch seems to be Swiss made. Has anyone seen another watch like this?
September 30, 2008, 12:54
Tom BrownStephen
Any chance of posting a photo of the movement? Have looked under the dial for any makers marks there?
Tom
October 04, 2008, 15:47
John WoolseyStephen, it'd be great to see some photo's of your watch, if you're having a problem getting any posted on the site, let us know and we'll help.
Best regards
John
October 05, 2008, 15:36
Steve GossardHere is a photo of the Philadelphia look-alike watch movement. Thanks for your interest.
Steve Gossard
October 05, 2008, 16:24
Tom BrownStephen
I like the looks of that movement, are there any marks under the dial, I am curious as to who made it too!
Tom
October 06, 2008, 09:04
Steve GossardThere is nothing under the dial but the serial number stamp. I am having it restored and cased, but haven't gotten it back yet. I also sent a photo to NAWCC, but they couldn't tell me anything for sure, either.
October 06, 2008, 14:36
John WoolseyStephen,
Many thanks for posting the pic's for us.
The movement is one I've never seen before, but it is of very good quality for its period.
The lever pivot is offcentre to the line of the balance and escape wheel, so it's a 'sidelever' type and appears to have steel pallets.
The pallet arm might be screwed under the lever or integral with it, and probably has jewel slips inserted into small milled slots in the pallet faces.
If the escape wheel tooth tips are pointed (not clear in the photo), it will be English, if club toothed, probably Swiss or, ....... maybe American?
Hope someone comes up with an ID for it!
Best regards
John
October 07, 2008, 18:40
Steve GossardI wonder if the company that produced the ebauches for the Philadelphia might have wound up with some stock left over when the company closed down, and finished off some of the movements and sold them themselves.
October 14, 2008, 20:23
Steve GossardHere is the dial side of the watch, too.