June 21, 2011, 23:28
Mike HodgeA couple new aquisitions need information Photos Now Posted
Today I visited a scrapper who was in town for several days. I purchased a few watches that I know something about, and a few I know nothing about. Here are the "know somethings"
The 19 J BW Raymond with a broken MS mentioned in David Abbe's Masterpiece post.
A Hamilton 992 with a broken staff
An Elgin sn 25317345, 15Jewel
A Waltham sn 16633396, a 12s 17j 1894
An 18s Elgin 15 jewel
Here are the "know nothing" abouts
A Rockford in what appears to be a 12s case, but a smaller movement SN 922371
A Gruen SemiThin SN 709457, this appears to be a 10s, or about 37 mm across the movement.
A Solid 14K Omega that appears to be a 10s, or equivalent, 17 jewel, in a triple signed dial/case/movement configuration.
Now I'll post some photos a bit later tomorrow, but the Omega, being the $$$ watch and the totally unknown Rockford are some I'll be watching for info on. Thanks
June 22, 2011, 11:06
Mike HodgeOmega Movement is in solid 14K, Omega Marked case.
June 22, 2011, 11:16
Mike HodgeOf these watches comments are sought. As I mentioned I really don't know much about them. I believe the Omega to have some value and I paid plenty to "save it from the scrapper" and will probably offer it for sale soon. All three of these watches run, but, need service and cleaning. I know the value is determined by the market forces of several bidders, or, a reasonable offering price but sometimes I list a Vacheron Constantine as a Swiss watch too!
June 22, 2011, 17:06
Mike HodgeThanks Lin, Opera Watch was what popped into my mind when I saw it. I'll be selling most of these but they are not being melted down and for the most part, I got them right.
June 22, 2011, 20:22
Theodore J. Brown Sr.Mike , that Rockford was way ahead of its time, looks like something from the 1920's, but Rockford was long gone by then.Nice watches...Take care, Ted.
June 24, 2011, 06:34
Claude GriffithI had an Elgin that was the same way, 6S movement, no 4th pinion end for a sec hand and a metal dial. the case was specially made to adapt the 6s movement to appear to be a 12s watch. I think the case was base metal so it would have been made to retrofit watches that had their cases scrapped duing the downturns in the early 20's and later in the depression.
June 25, 2011, 21:14
Mike HodgeHere's the above mentioned BW Raymond with a mainspring installed. Seems to right on after 2 hours!
June 25, 2011, 21:17
Mike HodgeThe dial without the crystal and bezel. Seems pretty nice. Not too bad and I "needed" a 19 Jewel BWR.
June 25, 2011, 21:19
Mike HodgeCase is in really nice shape for a Base Metal Keystone.