August 28, 2015, 18:45
Patrick Wallin(FREE) Staking stumps & brands, punches too. Lititure
I have gone back trough my bulletins and recomposed My staking articles. This PDF is free for the asking.
It has pictures of the stakes and the punches, their use, length, size, diameter, and what they are designed for (To do) & the part numbers. K & D, Marshal, Mosley, Little Giant & Watch-Craft.
No matter what set you have the punches and stumps are the same.(Interchangeable) Its 23 pages. If you have a K & D 43-317 or a 43-305B & C
It will work in any set. You don't get freebies any longer.
Leave your email address below and Ill send you one.
August 28, 2015, 19:02
Robert McClellandI would like one too Patrick.
Thanks very much.
Bob
rjmcclel@pacbell.net
August 28, 2015, 19:10
Harv HolcombI would like one also. Thank You Patrick
August 28, 2015, 19:57
George UlrichPatrick, Please send one my way geo.ulrich at yahoo dot com thanks again George
August 28, 2015, 20:07
Bob MurrayPlease send me one, Patrick.
Thanks,
Bob bobm4360 at frontier.com
August 28, 2015, 21:46
Kevin MoodiePatrick,
I'd appreciate a copy as well!
thanks Kevin
August 28, 2015, 23:42
Mike BendaPatrick
Please send that here thanks
blueresto@icloud.com
Mike
August 30, 2015, 15:15
Patrick WallinWell, an error occurred with my PDF reader and it won't send. PDF is too large. I'll try to break it in half and send it in two sections.
Please bare with me.......
August 30, 2015, 20:00
Roger StephensWould also like one Patrick.
Thanks
Roger
rjandladyj@yahoo.com
August 30, 2015, 21:02
Jeffrey SparksThanks Patrick, I'd like one as well!
September 01, 2015, 12:28
Patrick WallinLets do it this way.
Stumbled across this just now:
https://www.dropbox.com/s/7gh0...00dpi_ImagesOnly.pdfAnd here:
https://www.dropbox.com/s/y4w9...tSearchable.pdf?dl=0Thanks to Dave, he stumbled on it. After you get Dropbox set up it will automatically load the two files. These are much better than the ones I had. Its a slow loader and will take the better part of your Am or PM.
September 05, 2015, 06:21
Mike BendaThank you. Good stuff.
September 23, 2015, 15:28
Kevin Hoffmanthanks Patrick